Loading...
Serving Cleburne, TX and surrounding areas. (682) 847-7365
Plain concrete is hiding what your space could look like. Metallic epoxy gives you a hard, seamless, swirled floor that holds up to Texas summers and everyday use.
Metallic epoxy flooring in Cleburne is a thick, poured coating applied over your existing concrete slab - it contains metallic powder particles that swirl and shift as the coating levels out, creating a glossy, three-dimensional surface where no two floors ever look exactly alike, and most jobs take two to three days from start to finish.
If you have been putting off doing something with your garage, basement, or converted room because bare concrete just does not look finished, this is the service that changes that. Metallic epoxy is not paint - it bonds directly to the concrete as a hard, seamless layer that resists scuffs, dropped tools, and spills. The surface is non-porous, so cleanup is fast and stains do not soak in.
The visual result depends on the metallic color and the technique used during installation - some floors look like polished stone, others like flowing liquid metal. If you want a high-performance coating without the decorative flair, our standard epoxy floor coatings cover the same surface in a cleaner, chip-broadcast or solid-color finish. For spaces that also need the highest chemical and heat resistance, see our urethane cement flooring option.
Cleburne sits on Blackland Prairie clay that swells with rain and shrinks in dry summers. That movement shows up as cracks running across your slab over time. If you are seeing cracks that were not there a few years ago, a metallic epoxy system - applied after proper crack repair - seals and protects the surface going forward. Coating over unfilled cracks will not work; they will show through within a year.
Oil drips, rust rings from stored equipment, and years of foot traffic leave concrete looking worn and dingy. If you find yourself avoiding a room because the floor looks bad, that surface is ready for a change. Metallic epoxy covers staining completely and gives you a floor that looks like it belongs in a finished space rather than a storage area.
If you are turning a garage into a gym, workshop, or hangout space, bare concrete undercuts the whole project. The floor is the first thing people notice when they walk in. A metallic epoxy coating ties the space together and makes it feel intentional rather than half-done. Cleburne homeowners converting garages for new uses consistently cite the floor as the most impactful upgrade.
Bare concrete sheds fine dust constantly - you see it on shoes, stored items, and eventually on surfaces inside the home. This is especially common in older Cleburne homes where the slab was never sealed. A metallic epoxy floor stops that entirely because the surface is locked down and non-porous. You sweep once and it stays clean.
Every metallic epoxy project starts with the same foundation: surface grinding to open the concrete pores, crack filling, moisture testing, and a primer coat that bonds to your specific slab. What changes is the decorative layer. We offer single-color metallic systems for a clean, uniform swirl, as well as two-tone and multi-color blends that create more dramatic depth. For spaces where the visual goal is a high-performance finish rather than a statement floor, our standard epoxy floor coatings deliver the same durability in a chip-broadcast or solid-color format.
A clear protective topcoat goes on last, and we always offer an anti-slip texture additive for garages, laundry rooms, or any space where water is present. For commercial and industrial spaces that need the absolute highest chemical resistance and impact strength, our urethane cement flooring is the better fit - it handles heavy loads and temperature cycling that exceed what metallic epoxy is designed for. For residential garages, gyms, and converted living spaces, metallic epoxy hits the right balance of aesthetics and durability.
A flowing, one-tone metallic finish suited for homeowners who want a dramatic look with a clean, cohesive color palette.
Two metallic pigments blended together during application for deeper visual contrast - popular in home gyms and showroom-style spaces.
The same high-gloss metallic system with a fine-texture additive in the topcoat - the right choice for garages and laundry rooms where wet floors are a safety concern.
Included with every job - grinding, patching, and moisture testing before any coating goes down, especially important for Cleburne slabs affected by clay soil movement.
Cleburne sits on the Blackland Prairie, where the clay-heavy soil moves with every seasonal moisture change. That soil swells when it rains and shrinks when summer heat sets in, putting stress on concrete slabs year after year. A significant portion of Cleburne homes were built in the 1970s through 1990s, and those slabs have had decades to accumulate oil stains, surface wear, and hairline cracks from that constant movement. Applying a metallic epoxy system after proper surface preparation gives the slab a protective layer that handles that ongoing stress far better than bare concrete ever could. Homeowners in established neighborhoods near the historic downtown square, and out toward areas like Keene, regularly deal with these same slab conditions.
Cleburne summers also push past 95 to 100 degrees Fahrenheit, and that heat affects how epoxy coatings behave during installation and curing. Experienced local contractors schedule morning starts to get ahead of peak slab temperatures, and spring and fall are the most predictable windows for installation. This matters more for metallic epoxy than for standard chip-broadcast systems because the metallic manipulation step is time-sensitive - if the coating starts curing before the installer finishes working it, the swirl pattern locks in unfinished. Homeowners in communities like Joshua face the same seasonal timing considerations when planning a floor project.
Tell us the space, rough size, and what you are hoping to accomplish. We ask a few questions upfront so we come prepared to the site visit rather than showing up cold.
We visit your home, check the concrete, look for cracks or moisture issues, and test the slab before quoting anything. Your written estimate breaks down prep, materials, and labor - so you know exactly what you are paying for before we start.
Day one is grinding, patching, and cleaning. This step takes several hours and is the most important part - it is what makes the coating bond for years instead of peeling in months. It is noisy and creates some dust, so plan accordingly.
Day two brings the metallic pour and topcoat. Light foot traffic is safe after 24 hours; vehicle use after 72 hours. Before we leave, we walk through the finished floor with you and explain care and any follow-up warranty process in writing.
Free on-site estimate. No commitment. We assess your slab and walk you through the options before any work begins.
(682) 847-7365Johnson County clay causes more premature coating failures than bad products do. We check your slab for movement, cracks, and moisture before any prep begins. That extra step is what separates a floor that lasts a decade from one that starts peeling after two Texas summers.
You can verify our contractor registration through the Texas Department of Licensing and Regulation. That means you are hiring someone accountable to state oversight, not just a name on a truck. We carry full insurance and provide written contracts on every project.
Moisture moving through a slab is the leading cause of epoxy delamination, and it is a real issue in Cleburne given the clay soil and wet springs. We test before we start, every time. A contractor who does not mention moisture testing before quoting is skipping a step that matters.
Every job ends with a walkthrough where we review the finished floor together. Our warranty terms are in writing before we start - so if something is not right in the first weeks, you know exactly what the process looks like and do not have to chase anyone down.
Metallic epoxy is a specialty skill - the swirl manipulation step requires experience that standard flooring contractors do not have. We focus on floor coatings and know the conditions in Cleburne specifically. That combination is what gives you a finished floor you are proud of, not one you are calling to have fixed.
The highest-performance concrete coating for spaces that see heavy loads, chemical spills, or extreme temperature cycling.
Learn MoreA durable chip-broadcast or solid-color epoxy system for garages and workshops where function matters more than decorative flair.
Learn MoreSpring and fall book fast in North Texas - reach out now to hold your preferred installation window before the season fills up.